Description
The MILWAUKEE HOLE DOZER with Carbide Teeth is the best hole saw solution for metal and multi-material applications. The hole saw provide 50X life in extreme metal and multi-material cutting compared to other bi-metal hole saws. A tough carbide-grade build is combined with a durable 4 TPI design, yielding the best carbide tooth durability and longest life in stainless steel, abrasive material and fastener-embedded wood applications. The HOLE DOZER has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Thermal coating on the saw reduces friction and drag during cutting. Cordless efficiency also allows for faster cutting in all applications. The hole sawslug is easy to remove with The Plug Jack, enhancing user productivity by providing the best access and leverage to remove material slugs.
- Milwaukee carbide teeth technology
- 4 TPI carbide teeth design gives best durability and longest life in extreme applications
- Thermoset coating reduces friction and drag, increasing overall speed and cordless efficiencies
- Plug-Jack T-slot’s enhance user productivity by providing best access and leverage to remove material slugs
- Cuts stainless steel, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles and more
- For the toughest applications where bi-metal hole saws cannot cut
- Includes: (1) 3-1/2 in. HOLE DOZER with carbide teeth
Specifications
- Drill Bit Type(s) Included: Hole Saw
- Min Chuck Size Required: N/A
- Arbor included: No
- Bit Material: Carbide
- Pilot Bit Included: No
- Individual/Set: Individual
- Material Cut: Multi-Purpose
- Drill Bit Type: Hole Saw
- Hole Saw Diameter (in): 3-1/2″
- Drilling Depth (in): 1.62
- Bit Diameter: 3/8 in
- Bit Length (in.): 1.88
Additional information
| Weight | .74 lbs |
|---|---|
| Dimensions | 2.25 × 4.88 × 5.88 in |
| Model | 49-56-0738 |
| UPC | 045242504244 |
Reviews (81)
81 reviews for Milwaukee 3-1/2 in. Hole Dozer Carbide Hole Saw
-
This one hole saw cost me half as much as a complete set of 10 dozer saws, which sadly did not contain this specific size
October 23, 2022Verified Purchase -
I drilled 4, 7/8 inch holes through 1/4 steel. I used my drill press at 1000rpm, no lube, it drilled easily in about 20 seconds but the chatter and vibration from my drill press made it 1/16″ too big. I’m not 100% sure if it’s the bit or my press, but don’t make my mistake and test it in scrap first to test your hole.
October 14, 2022Verified Purchase -
It is working very well. I think I will in time be replacing all the hole dozers I have that are not with the carbide. They seem to make a smoother cut.
September 29, 2022Verified Purchase -
Dozer is putting it mildly. Milwaukee Hole Dozers do amazing things to all materials short of concrete. hard working and long life make them unbeatable.
September 24, 2022Verified Purchase -
Great hole saw! Cuts through wood like butter! Just make sure to get the center drill with the prongs, with a hole saw this big, it will spin right off of a typical threaded center bit without the prongs to keep it from spinning on the threads. It fit my smaller hole saw center bit, but it unthreaded as soon as I stopped. This wasn’t a problem once I got the correct center bit with the prongs!
September 14, 2022Verified Purchase -
I use these hole saws all the time – I wish they didn’t cost so much. These saws are a mush for getting through the plate on a house and generally work very well. Carbide is ok I guess – I still haven’t had much luck with them if you hit into a nail or other metal object. They don’t seem to hold up as good as a carbide saw blade does. Still, a must have if your running pipes through the wall.
September 4, 2022Verified Purchase -
Sometimes you have a need to cut holes through different materials to accomplish a task. I bought one of those portable a/c units, it comes with different options to vent it outside one is through the window and the other is through the wall. I have solar screens on my windows and the air flow was very restricted so I needed to vent through the wall this is where the Hole saw came to the rescue it made the job easy so I recommend this tool highly.
September 2, 2022Verified Purchase -
I needed to put a faucet hole in a new countertop, but we did not want to have the factory do it because we wanted to have the vessel sink and faucet sitting on the vanity top in our bathroom to decide on where the faucet would be. I used the drilll bit on the chuck to mark the spot for the faucet and we took the top off and cut the hole from the underside. It worked beautifully!
August 14, 2022Verified Purchase -
Carbide teeth hole saw is worth buying, this will lasts 100 times longer then conventional bi-metal saw. I would definitely recommend to buy it, especially if you need to use it on the cement board, stacco surfaces. I had compared Milwaukee Carbide saw with Lenox and found the Milwaukee is a win win
July 30, 2022Verified Purchase -
Cut 23 circular holes in metal 1/8 thick with no difficulty. Worked great
July 27, 2022Verified Purchase
Related products
Drill Bits
Model# 49-56-0744
Drill Bits
DEWALT Titanium Pilot Point Drill Bit Set (21-Piece) with Bonus MaxFit Screwdriving Set (45-Piece)
Model# DWAMAXTP
Drill Bits
Hilti TE-YX 1-1/2 in. – 15 in. Carbide SDS Max Imperial Hammer Drill Bit
Model# 2165920
Drill Bits
Model# LIS81110
Drill Bits
Model# 282269
Drill Bits
Drill America m8 x 1 High Speed Steel Tap and 7.00 mm Drill Bit Set (2-Piece)
Model# POUM8X1
Drill Bits
Milwaukee Hole Dozer General Purpose Bi-Metal Hole Saw Set with Carbide Hole Saw (7-Piece)
Model# 49-22-4082
Drill Bits
Milwaukee Shockwave Torx #25 6 in. Impact Duty Steel Screwdriver Bit (1-Pack)
Model# 48-32-4810
Leave feedback about this