Milwaukee 6 in. Carbide Hole Dozer Saw

Using a couple times now very nice to have a sturdy rigid six-inch Milwaukee holesaw busthose works well so far no issues have use it just twice cutting holes why needed to ventilation purposes so far so good everything seems to be working the ad seems to be holding up well on the cutting desk so far everything seems to working just fine would recommend this for anybody needing a 6 inch holesaw

I picked up this whole saw in the section size in case I needed to make a very large hole for feeding any pipe through plywood or any other material. It is there ice hardened carbide holesaw attachment. This is not the same as the hole dozer attachment that has teeth that can be re-sharpened. Detachment itself should last for many holes the only downside is you can’t re-sharpened it like you can with the hole dozer. If you’re drilling occasional holes the size this is perfect for you but if you’re going to be doing it repetitively I would definitely recommend getting a hole dozer with the carbide teeth that can be resharpen

You can’t beat these Milwaukee hole saws for being tough. The white paint job is funny because some of it invariably rubs off on the first use. But I could care less as long as it cuts well and these do. I have a full range of sizes and this 6 inch was a nice addition to the set. I’ve cut a variety of materials with them from 2×6’s and the like to light steel and they done the job well. This will likely not see the tougher materials since that is not what I had in mind for it but should the need arise I have no doubt it will do the job just as well as the other hole dozer saws I have.

This Saw Out Performs All Others. Milwaukee 6 inch Carbide Hole Dozer Saw is the Best I’ve Ever used or had. It cuts thru a wide variety of materials including Stainless Steel.I build a lot of cornhole boards and was using bi-metal saws and leaving the hole a little rough.Not with this Saw. Smooth cuts every time, thanks to the Carbide and the Thermoset Coating on the Saw. Anther Great Tool from Milwaukee.

I have been a builder remodeler for 49 years, and as such I have many opportunities to use a tool like this Milwaukee 6 IN. CARBIDE HOLE DOZER SAW. These carbide hole saws are of high quality, and they work very well for work requiring drilling work into more challenging materials that we drill into as we often do. Milwaukee tools are always of high quality as well, so these are a very good example of that.

Milwaukee 6 in. Carbide Hole Dozer SawThis item was exactly what I needed.The carbide teeth are sharp and cut through wood without an issue. I usually have to roll a hole saw from side in a rocking motion to get it to cut but this saw went straight and cut just fine with minimal rocking.The saw itself is very well made.It is just over an inch and a half deep to give you a good cutting depth, the slots on the sides assist you in getting the cut plugs out. The coating on the saw helps to prevent sticking while in use. I used it in reverse to cut 6 holes through drywall on my ceiling for recessed lights and I was finished in 10 minutes. This is a great tool from Milwaukee.I highly recommend this item.

This dozer saw is a monster! Although there won’t be too many times I will need a 6 inch hole, I now have the best saw ever! It cuts smoothly and quick. This is perfect for cutting holes for so many applications in wood, plastic, and metals like aluminum. The rip guard teeth are very sharp and they have a limited lifetime warranty. It cuts to 1 1/8 inch deep. Love it.

The 6 inch carbide hole dozer saw arrived quickly and well packaged to prevent loss or damage, it was intact inside a blister pak. I selected it because of the mfg’ers reputation for top quality. I like the large 6 inch diameter for putting very large conduit or pvc sewer pipe etc.into the cut hole. The specific feature is the carbide sharp teeth that are gauaranteed for life, not to chip or break. I use it to cut thru all types of materials. The quality is superb. Easy to use, and switch over to smaller sizes. It’s working out as planned, I like it and would order another same one or smaller and add it to my set of Dozer hole saws.

About as quick through most materials as the 3-toothed carbide hole saws that I use for most of my large-hole boring. With the materials and the likelihood of nail encounters I face, the cost of carbide is well worth it. Unfortunately – even though these are marketed as being for use in “wood with nails” – the hole saw was trashed on the very first framing nail strike. Disappointing, to say the least. The carbide Milwaukee Big Hawgs that I use will just chew right through nails – even lags – with no damage to them, or even discernible wear. These should be great for through abrasive materials, but I would not consider them for use anywhere encountering a substantial nail or other metal fastener is a possibility.

The 6 inch carbide hole dozer saw is a very good saw and has a very good weight to it. I plan to make some corn hole boards with it.. All you have to do is fill some socks with beans and you will have yourself a game to play. You will also need a drill to use it with. Yes it meets my expectations and I have had it about a week now. It don’t need extra parts for it , all you need is a good drill to use with it;