Milwaukee Oscillating Multi-Tool Blade Kit (6-Piece)

The Milwaukee blades are sturdy, relatively thick, and the teeth are precise. Nice high quality blades.When you compare them to the stock blades we received with our Dremel 6300, it is very apparent that the Milwaukee blades are much higher quality.They cut steel faster and with more precision. Cuts through hardened steel screws in 15 seconds. See pic. No noticeable wear after 3 cuts through hardened steel screws.They cut wood fast and with precision. We cut a hole for an electrical junction box in a little less than 2 minutes in 11/16 thick plywood. See pics. No noticeable wear.These blades are a lot better than the stock dremel blades.

If you use all 4 blades that come in the kit, then I would suggest this kit. Individually priced is double that of the kit, plus you get a case to keep them in. The ones I use the most are the Titanium blades. They say they’ll last 15 times longer; time will tell. I use then to trim the bottom of the door jambs, door casings and baseboards when installing floor laminate. That way I’m not worried about fitting a finishing nail. The hardwood blade works great when I had to replace individual piece of flooring that was damage. The others I’ve used to cut in new electrical boxes.

Good, sharp, quick cuts and a sturdy case, this set is a solid addition to anyone’s tool collection. They’re universal-fit, and should work with your oscillating tool unless yours is Starlock. A Dremel adaptor is included. Bi-metal blades, some are comingled with titanium for longer life. I like the curved-front blades, their Pro-Curve for hardwoods. Those blades stays on line really nicely for me.Blades come oiled to prevent corrosion, so they’re going to arrive in great condition. I was surprised to see the case was totally open inside. I never cut the plastic blade-mounting studs out of the former style because it made sense to “hang” the blades, but this new style, where the blades can bounce a bit, is so fast and easy to grab a blade out of single-handedly. Next flat pieces of foam that show up around here will go in there to sandwich the blades. Blades get worked so hard typically that I’m not worried if I lose a little time in exchange for easy access. This is a great kit, and made in the USA!

An excellent blade assortment, it’s nice to have them neatly packaged in a case instead of laying loose in my toolbox. The blades are well made, and the kit comes with the most popular blades, at least for my purposes, especially the bi-metal titanium blades that I need for metal cutting, or for cutting through nails imbedded in wood. I’ve used each size blades in the shop, so this kit is a great idea.

Great variety set of blades all with their own purpose and all able to help you do the job a little more efficiently. The blades are nice and sharp and really cut through some wood with ease. I paired these blades with my M18 oscillating tool and thought they were a match made in heaven. The blades were able to cut through wood cleanly with only minor tearing or chip out.The blades designed to cut through softer metals like nails did an excellent job at that and I have no complaints about what they could do. They will take more of a beating going through the metal objects so the blade life won’t be as long as if you only cut through wood.The case that comes with the blades is ok but not the main draw here. Unlike in prior versions of this set the case does not come with holders to look in your blades so they will rattle around in the case. Again this is only a minor item because the main thing is the blades and they are quality blades.Overall I would recommend this set of blades. It is a nice quality set with a decent variety of most needed blades.