TEKTON 9-1/2 in. Lineman’s Pliers

Broad, Flat Jaws: Nearly square, with straight, flat nose and edges, these jaws can bend thin, flat pieces like metal tabs and mounting brackets to a crisp right angle. A small gap (1 mm plus/minus 0.5 mm) allows the jaw faces to remain nearly parallel while holding the ends of multiple wires, keeping each wire flat and in position while twisting them together. Crosscut Teeth: Oriented at 120° to each other 60° to each side of the jaw centerline the serrations are cut in 2 passes to form regularly-spaced, diamond-shaped teeth. Unlike single serrations that are cut straight across the jaw, this pattern creates uniform contact across the jaw surface, allowing you to grasp, pull and twist evenly in any direction. Induction-Hardened Side Cutter for Soft and Hard Wire: Machining to an optimized 65° angle allows the blades to be strong yet sharp, producing a satisfyingly smooth, clean cut that requires minimal effort. After the full pliers have been heat treated, a secondary induction-heating process hardens just the blades to 58 HRC to 64 HRC, making them extremely durable and able to cut tougher materials. Lean and Practical Grips: Single-layer vinyl grips offer a bit of comfortable cushion and provide a smooth, yet nonslip surface. They’re slim, not thick and bulky, so they stay out of the way when space is tight and are always easy to handle, even with gloves on.

• Spacing gap between jaws keeps ends of multiple wires in position while twisting them together
• Crosscut teeth distribute force evenly for sure grip in any direction
• Side cutter with induction-hardened blades (HRC 58-64) cleanly snips copper, aluminum and steel wire
• Lower jaws exert nearly 30% more force than main jaws for closing wire clamps and crimping connectors
• Wide, gently rounded handle profile with slim, nonslip grips lets you comfortably squeeze as hard as needed
• Always guaranteed: no time limits and no fine print, just personalized solutions
• TEKTON makes strong, classic tools for the expert tool user

Specifications

• Joint Type: Fixed Joint
• Number of Pieces: 1
• Tools Product Type: Hand Tool
• Handle Material: Composite
• Jaw Capacity: 0 in
• Hand Tool Type: Linesman Pliers
• Jaw Tip Size: 0 in
• Individual/Set: Individual
• Insulated: No
• Product Height (in.): 9.5 in
• Product Depth (in.): .8 in
• Handle Length: 7.5 in
• Product Width (in.): 2.2 in

There are no reviews yet.